Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
HTML Wrap
classsection group
HTML
<span data-swiftype-index="true">
HTML Wrap
classcol span_3_of_5

AccountRight Plus and Premier, Australia only

UI Text Box
sizemedium
typenote

You must be reporting to the ATO via STP Phase 2

If you

've made a mistake when recording a pay, it's easy to fix

haven't already, you need to move to STP Phase 2 to stay compliant with the ATO. But we have you covered – see how easy it is to move.

Using Single Touch Payroll?

Your
UI Text Box
sizemedium
typenote
tip

Need some guidance?

Check out our end of payroll year tasks MYOB Academy course or the EOFY hub for key end of year dates and resources.

If you've made a mistake when recording a pay, it's easy to fix.

How does changing a pay affect Single Touch Payroll (STP)?

With STP, your employees' year to date (YTD) figures are sent to the ATO

as part of Single Touch Payroll reporting. If changing a pay affects

after each pay run. So if changing an employee's pay affects their YTD figures, the updated figures will be sent to the ATO the next time you do a pay run.

If you want to remove or "undo" a pay that you've sent to the ATO, you'll be able to delete or reverse it based on its status in the payroll reporting centre. For example, you can delete a pay if its status is Rejected, but if the status is Accepted you can only reverse it. This

is sometimes referred to as an update event.

 ensures you're not deleting anything which has already been accepted by the ATO. Pay runs will remain listed in the payroll reporting centre even after deleting or reversing a pay in AccountRight.

If the pay you need to change is in a payroll year that's been finalised with the ATO, see Changing a pay after finalising with Single Touch Payroll.

To change a pay

Depending on your scenario, here's how to change a pay:

 

If you need to...Do this...
undo a pay

Reverse or delete the pay, then re-enter it (if needed).

See To reverse or delete a pay.

fix the hours or amounts in a pay

Adjust the employee's next pay, or process a separate pay for the adjustment.

See To fix the hours or amounts in a pay.

fix an overpayment or underpayment

Adjust the employee's next pay, or process a separate pay for the adjustment.

See Fixing a payroll overpayment or underpayment.

fix a pay which contained wrong leave amounts

Adjust the employee's next pay, or process a separate pay for the adjustment.

 See  See Adjusting leave entitlements

fix a pay which contained wrong superannuation amounts

Adjust the employee's next pay, or process a separate pay for the adjustment.

See Checking and adjusting superannuation

fix a termination pay which contained wrong ETP amounts

Reverse the termination pay, then re-enter it with correct ETP amounts.

See Fixing an ETP.

change any of these details in a pay:

  • pay period

  • payment method

  • statement text

  • whether a cheque or pay slip needs to be printed or emailed

Open the payroll transaction and make your changes.

See To change other pay details.

change what's displayed on your pay slips

Edit your pay slip form.

See Personalising pay slips.

change the payment date

You can't change the payment date of a recorded pay.

Instead you'll need to delete or reverse the pay then record it again with the correct payment date.

Anchor
reverse
reverse
To reverse or delete a pay

If your user role allows transactions to be changed, you can reverse or delete a pay.

UI Expand
titleTo reverse a pay

To reverse a pay

Using timesheets? You can't reverse a pay which uses timesheets but you'll be able to delete it. See 'To delete a pay' below for detailsReversing a pay instead of deleting it provides an audit trail. This means you'll always have a record of what was reversed and when. You'll also be prompted to submit the reversal to the ATO for STP reporting—the same as any other pay. This cancels out the original pay you reported to the ATO and ensures your employees' STP payroll totals are updated.

  1. Ensure the Transactions CAN'T be Changed, They Must be Reversed preference is selected (go to the Setup menu > Preferences > Security tab).


  2. Display the pay to be reversed:

    1. Click Find Transactions at the bottom of the Command Centre then click the Card tab.

    2. Specify your search criteria to find the pay to be reversed.

    3. Open the pay by clicking its zoom arrow ().

  3. Go to the Edit menu and choose Reverse Transaction. If you only see the option to Delete Transaction, check your security preference as shown in step 1.

     

  4. If the pay being reversed is a cheque or electronic payment, a message will be displayed advising it will be recorded as cash. Click Yes to proceed.

    The Pay Employee window appears with details of the pay reversal.

  5. Click OK to the following confirmation message:
    Image Added

  6. Click Record to process the reversal.

  7. When prompted to declare the reversal to the ATO, enter the name of the Authorised sender and click Send.
UI Text Box
sizemedium
typenote

If you've had to reverse a pay because an employee left without notice, and you're using Single Touch Payroll, you need to tell the ATO that you won't be sending any more payroll information for that employee. See Terminate an employee in Single Touch Payroll reporting.

Deleting a pay removes it completely from AccountRight. You should only delete a pay if the amount hasn't been withdrawn from your bank account. If you need to adjust an overpaid or underpaid amount see

the appropriate FAQ in

To fix the hours or amounts in a pay.

If you've reported a pay to the ATO for STP, you might need to reverse the pay instead of deleting it. See the FAQs below for more details about what determines if a pay can be deleted or reversed.

To delete a pay

  1. Ensure the Transactions CAN'T be Changed, They Must be Reversed preference is not selected (go to the Setup menu > Preferences > Security tab).

  2. Display the pay to be deleted:

    1. Click Find Transactions at the bottom of the Command Centre then click the Card tab.

    2. Specify your search criteria to find the pay to be deleted.

    3. Open the pay by clicking its blue zoom arrow ().

  3. Go to the Edit menu and choose Delete Transaction. If you don't have this option, see the FAQs below for some possible reasons.

UI Expand
titleTo delete a pay
UI Text Box
sizemedium
typenote
UI Text Box
sizemedium
typenote

Delete Transaction greyed-out? Your user role needs to be set up with permission to delete transactions. If you need to regularly change transactions, ask your administrator to add this permission to your user role.

What will prevent me from deleting a pay?

A transaction's zoom arrow will be shaded (Image Removed) if:

  1. you've set the security preference in AccountRight which prevents transactions from being deleted (they can only be reversed) Learn about changing or deleting transactions

  2. the transaction is from a previous (closed) financial year Learn about closing a financial year

  3. the transaction is part of a processed Prepare Electronic Payment Learn about electronic payments

  4. the transaction is part of a Pay Liabilities transaction  Learn about paying payroll liabilities

  5. the transaction is part of a Pay Super transaction Learn about making super payments

  1.  

  2. If the pay has been reported to the ATO for STP, you'll be prompted to reverse the pay instead of deleting it. Click OK and follow the steps above to reverse the pay.
    Image Added
UI Text Box
sizemedium
typenote

If you've had to delete a pay because an employee left without notice, and you're using Single Touch Payroll, you need to tell the ATO that you won't be sending any more payroll information for that employee. See Terminate an employee in Single Touch Payroll reporting.

 

Anchor
amounts
amounts
To fix the hours or amounts in a pay

Here are a few common scenarios where a similar approach is used: include the adjustment in the employee's next pay, or record a separate pay for the adjustment. If your scenario isn't covered, you can reverse or delete the pay then re-enter it.

UI Expand
titleTo fix a pay with incorrect leave or super amounts

To fix a pay with incorrect leave or super amounts

To fix a pay which contained incorrect super or leave amounts, either make the adjustment on their next pay, or record a new pay for the employee using the Process Payroll Assistant (Payroll command centre > Process Payroll).

Enter the super amounts or leave hours you need to adjust as positive or negative amounts. Remember to zero out all the categories that you are not adjusting.

The end result should be $0 net pay, and the only amounts/values should be against the categories you are editing. You'll be notified that you are recording a $0 pay, and that it will be a "void" cheque. That's fine in this case.

Also see Adjusting leave entitlements and Checking and adjusting superannuation.

UI Expand
titleTo fix a pay with an incorrect PAYG amount

To fix a pay with an incorrect PAYG amount

To fix a pay where the wrong amount of PAYG tax was withheld, work out how much PAYG tax has been overpaid or underpaid, then adjust the PAYG on the employee's next pay.

Alternatively, you can create a separate pay for the adjustment and enter the adjustment value against the PAYG Withholding category. Remember to zero out all other hours and values on the pay.

If the employee had overpaid PAYG, enter the adjustment as a positive value. If it's to adjust an underpayment, enter a negative value.

UI Expand
titleTo fix an overpayment

To fix an overpayment

If you've overpaid an employee you can make an adjustment on their next pay, or if they have paid back the amount, record a new pay for the employee using the Process Payroll Assistant (Payroll command centre > Process Payroll).

Enter the adjustment as a negative (-) amount in the Hours or Amount columns of the category that was overpaid. Remember to zero out all the categories that you are not adjusting. The net pay amount should be equal to the overpayment, and shown as a negative amount. You can also use the Memo field on the pay to enter a note about this payment.

Note that when recording a pay with a negative net pay amount, the payment method is automatically changed to Cash and the linked bank account for cash payments will be used. This can't be changed.

Can't record a negative pay? This feature is only available in the new AccountRight. See the help for these other products: AccountRight v19 | AccountEdge.

UI Expand
titleTo fix an underpayment

To fix an underpayment

If you've underpaid an employee you can make an adjustment on their next pay, or if they want the money now, record a new pay for the employee using the Process Payroll Assistant (Payroll command centre > Process Payroll).

Enter the adjustment amount in the Hours or Amount columns of the category that was underpaid. Remember to zero out all the categories that you are not adjusting. The net pay amount should be equal to the underpayment. You can also use the Memo field on the pay to enter a note about this payment.

Anchor
other
other
To change other pay details

Apart from the changes described above, there's only a limited number of other changes you can make to a recorded pay. These include:

  • pay period

  • memo

  • payment method

  • employee bank account details

  • statement text

  • whether a cheque or pay slip needs to be printed or emailed.

UI Expand
titleTo change other pay details
  1. Go to the Payroll command centre and click Transaction Journal.

  2. Find the pay to be changed (use the Dated From and To fields to specify a date range).

  3. Click the zoom arrow to open the pay.

  4. Make your changes. To change the bank account this pay will be paid into (this pay only), click Banking Details and enter the new bank details for this pay.

  5. When you're done, click OK.

UI Text Box
sizemedium
typenote

To change the details of a job allocated to a pay transaction, go to the Lists menu > Jobs. Click the zoom arrow of the job, make your changes and click OK.

What will prevent me from changing these details?

You won't be able to change these details if:

Anchor
faq
faq

HTML
<h2><i class="fa fa-comments"></i>&nbsp;&nbsp;FAQs</h2><br>
UI Expand
titleWhat will prevent me from deleting a pay?

What will prevent me from deleting a pay?

A pay can't be deleted if:

UI Expand
titleWhat determines if a pay can be deleted or reversed?

What determines if a pay can be deleted or reversed?

There's a security preference which controls whether your transactions can be deleted or reversed (Setup menu > Preferences > Security tab > Transactions CAN'T be Changed, They Must be Reversed).

For pays that have been submitted to the ATO via STP, the status of the report submission also determines if you can delete the pay or if you'll need to reverse it instead.

Image Added

This table shows whether you can delete or reverse a pay based on its status in the STP Payroll Reporting Centre. For example, if the status is Sent you can only reverse the pay.

Status
Can delete?
Can reverse?
Rejected
Not Sent
Sent
Accepted
Accepted with errors
HTML
<div style="display: none;" data-swiftype-name="keywords" data-swiftype-type="enum">undo correct payroll</div> 
</span>
HTML Wrap
width15%
classcol span_1_of_5
 
HTML Wrap
floatleft
classcol span_1_of_5
Panelbox
namegreen
titleRelated topics
HTML Wrap
classsidebarlinks

Processing your payroll

Enter employee payroll information

Changing an employee's salary or hourly rate

Changing an employee from full time, part time or casual

About Single Touch Payroll reporting

Fixing a payroll overpayment or underpayment

Personalising pay slips

Panelbox
nameyellow
titleFrom the community

RSS Feed
titleBarfalse
max5
showTitlesOnlytrue
urlhttp://community.myob.com/myob/rss/search?q=edit+pay&filter=labels%2Clocation%2CsolvedThreads&location=category%3AAccountRight&search_type=thread&solved=true

HTML Wrap
classmorelinks
More »