Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
HTML Wrap
classsection group
HTML
<span data-swiftype-index="true">
Ensure the Transactions can’t be changed, they must be reversed preference is not selected in
html-wrap
classcol span_3_of_5

AccountRight Plus and Premier, Australia only

Only some pay details can be edited once you’ve recorded a pay. If the Transactions can’t be changed, they must be reversed preference is not selected (Setup menu > Preferences > Security tab), you can change these pay details:

  • pay period,

  • payment method,

  • employee bank account details,

  • statement text,

    If you've made a mistake when recording a pay, it's easy to fix.

    How does changing a pay affect Single Touch Payroll (STP)?

    With STP, your employees' year to date (YTD) figures are sent to the ATO after each pay run. So if changing an employee's pay affects their YTD figures, the updated figures will be sent to the ATO the next time you do a pay run.

    If you want to delete a pay that's already been reported to the ATO, you'll need to reverse it instead then report that reversal to the ATO. This ensures you're not deleting anything which has already been reported to the ATO.

    Depending on your scenario, here's how to change a pay:

     

    UI Expand
    titleHow do I delete a pay that was entered incorrectly?
    If you need to...Do this...
    undo a pay

    Reverse or delete the pay, then re-enter it (if needed).

    See To reverse or delete a pay.

    fix the hours or amounts in a pay

    Adjust the employee's next pay, or process a separate pay for the adjustment.

    See To fix the hours or amounts in a pay.

    fix an overpayment or underpayment

    Adjust the employee's next pay, or process a separate pay for the adjustment.

    See Fixing a payroll overpayment or underpayment.

    fix a pay which contained wrong leave amounts

    Adjust the employee's next pay, or process a separate pay for the adjustment.

     See Adjusting leave entitlements

    fix a pay which contained wrong superannuation amounts

    Adjust the employee's next pay, or process a separate pay for the adjustment.

    See Checking and adjusting superannuation

    change any of these details in a pay:

    • pay period

    • payment method

    • statement text

    • whether a cheque or pay slip needs to be printed or emailed

    Open the payroll transaction and make your changes.

    If the Transactions can't be changed... preference is selected, you can’t make any changes to the pay.

    To view and make changes to a pay you’ve already recorded, redisplay it by clicking Find Transactions in the Command Centre, selecting the employee in the Card tab and clicking the pay's blue zoom arrow.

    HTML
    <h2><i class="fa fa-comments"></i>&nbsp;  FAQs</h2>

    See To change other pay details.

    change what's displayed on your pay slips

    Edit your pay slip form.

    See Personalising pay slips.

    Anchor
    reverse
    reverse
    To reverse or delete a pay

    If your user role allows transactions to be changed, you can reverse or delete a pay.

    UI Expand
    titleTo reverse a pay

    To reverse a pay

    Reversing a pay instead of deleting it provides an audit trail. This means you'll always have a record of what was reversed and when. You'll also be prompted to submit the reversal to the ATO for STP reporting—the same as any other pay. This cancels out the original pay you reported to the ATO and ensures your employees' STP payroll totals are updated.

    1. Ensure the Transactions CAN'T be Changed, They Must be Reversed preference is selected (go to the Setup menu > Preferences > Security tab).
      Image Added

    2. Display the pay to be reversed:

      1. Click Find Transactions at the bottom of the Command Centre then click the Card tab.

      2. Specify your search criteria to find the pay to be reversed.

      3. Open the pay by clicking its zoom arrow (Image Added).

    3. Go to the Edit menu and choose Reverse Transaction.
      Image Added

       

    4. If the pay being reversed is a cheque or electronic payment, a message will be displayed advising it will be recorded as cash. Click Yes to proceed.

    5. Click OK to the following confirmation message:
      Image Added

    6. Click Record to process the reversal.

    7. When prompted to declare the reversal to the ATO, enter the name of the Authorised sender and click Send.
    UI Text Box
    sizemedium
    typenote

    If you've had to reverse a pay because an employee left without notice, and you're using Single Touch Payroll, you need to tell the ATO that you won't be sending any more payroll information for that employee. See Terminate an employee in Single Touch Payroll reporting.

    UI Expand
    titleTo delete a pay

    Deleting a pay removes it completely from AccountRight. You should only delete a pay if the amount hasn't been withdrawn from your bank account. If you need to adjust an overpaid or underpaid amount see To fix the hours or amounts in a pay.

    If you've reported a pay to the ATO for STP, you might need to reverse the pay instead of deleting it. See the FAQs below for more details about what determines if a pay can be deleted or reversed.

    To delete a pay

    1. Ensure the Transactions CAN'T be Changed, They Must be Reversed preference is not selected (go to the Setup menu > Preferences > Security tab).

      Redisplay Image Added

    2. Display the pay by clicking to be deleted:

      1. Click Find Transactions

      in
      1. at the bottom of the Command Centre

      , selecting the employee in the Card tab and clicking the pay's blue zoom arrow
      1. then click the Card tab.

      2. Specify your search criteria to find the pay to be deleted.

      3. Open the pay by clicking its blue zoom arrow (Image Added).

    3. Go to the Edit menu and choose Delete Transaction. If you don't have this option, see the FAQs below for some possible reasons.
      Image Added

       

    4. If the pay has been reported to the ATO for STP, you'll be prompted to reverse the pay instead of deleting it. Click OK and follow the steps above to reverse the pay.
      Image Added
    ui-text-box
    sizemedium
    typenote

    If you've had to delete a pay because an employee left without notice, and you're using Single Touch Payroll, you need to tell the ATO that you won't be sending any more payroll information for that employee. See Terminate an employee in Single Touch Payroll reporting.

     

    Anchor
    amounts
    amounts
    To fix the hours or amounts in a pay

    Here are a few common scenarios where a similar approach is used: include the adjustment in the employee's next pay, or record a separate pay for the adjustment. If your scenario isn't covered, you can reverse or delete the pay then re-enter it.

    Either make the adjustments
    ui-expand
    titleI recorded To fix a pay with incorrect leave or super amounts, how can I resolve this?

    To fix a pay with incorrect leave or super amounts

    To fix a pay which contained incorrect super or leave amounts, either make the adjustment on their next pay, or record a new pay for the employee using the Process Payroll Assistant (Payroll command centre > Process Payroll).

    Enter the super amounts or leave hours you need to adjust as positive or negative amounts. Remember to zero out all the categories that you are not adjusting.

    The end result should be $0 net pay, and the only amounts/values should be against the categories you are editing. You'll be notified that you are recording a $0 pay, and that it will be a "void" cheque. That's fine in this case.

    Also see Adjusting leave entitlements and Checking and adjusting superannuation.

    Either make the adjustment
    UI Expand
    titleI overpaid an employee, how do I account for this?
    To fix a pay with an incorrect PAYG amount

    To fix a pay with an incorrect PAYG amount

    To fix a pay where the wrong amount of PAYG tax was withheld, work out how much PAYG tax has been overpaid or underpaid, then adjust the PAYG on the employee's next pay.

    Image Added

    Alternatively, you can create a separate pay for the adjustment and enter the adjustment value against the PAYG Withholding category. Remember to zero out all other hours and values on the pay.

    If the employee had overpaid PAYG, enter the adjustment as a positive value. If it's to adjust an underpayment, enter a negative value.

    UI Expand
    titleTo fix an overpayment

    To fix an overpayment

    If you've overpaid an employee you can make an adjustment on their next pay, or if they have paid back the amount, record a new pay for the employee using the Process Payroll Assistant (Payroll command centre > Process Payroll).

    Enter the adjustment as a negative (-) amount in the Hours or Amount columns of the category that was overpaid. Remember to zero out all the categories that you are not adjusting. The net pay amount should be equal to the overpayment, and shown as a negative amount. You can also use the Memo field on the pay to enter a note about this payment.

    Note that when recording a pay with a negative net pay amount, the payment method is automatically changed to Cash and the linked bank account for cash payments will be used. This can't be changed.

    Can't record a negative pay? This feature is only available in the new AccountRight. See the help for these other products: AccountRight v19 | AccountEdge.

    UI Expand
    titleTo fix an underpayment

    To fix an underpayment

    If you've underpaid an employee you can make an adjustment on their next pay, or if they want the money now, record a new pay for the employee using the Process Payroll Assistant (Payroll command centre > Process Payroll).

    Enter the adjustment amount in the Hours or Amount columns of the category that was underpaid. Remember to zero out all the categories that you are not adjusting. The net pay amount should be equal to the underpayment. You can also use the Memo field on the pay to enter a note about this payment.

    Anchor
    other
    other
    To change other pay details

    Apart from the changes described above, there's only a limited number of other changes you can make to a recorded pay. These include:

    • pay period

    • memo

    • payment method

    • employee bank account details

    • statement text

    • whether a cheque or pay slip needs to be printed or emailed.

    UI Expand
    titleTo change other pay details
    1. Go to the Payroll command centre and click Transaction Journal.

    2. Find the pay to be changed (use the Dated From and To fields to specify a date range).

    3. Click the zoom arrow to open the pay.

    4. Make your changes. To change the bank account this pay will be paid into (this pay only), click Banking Details and enter the new bank details for this pay.

    5. When you're done, click OK.

    UI Text Box
    sizemedium
    typenote

    To change the details of a job allocated to a pay transaction, go to the Lists menu > Jobs. Click the zoom arrow of the job, make your changes and click OK.

    What will prevent me from changing these details?

    You won't be able to change these details if:

    Anchor
    faq
    faq

    HTML
    <h2><i class="fa fa-comments"></i>&nbsp;&nbsp;FAQs</h2><br>
    UI Expand
    titleWhat will prevent me from deleting a pay?

    What will prevent me from deleting a pay?

    A pay can't be deleted if:

    UI Expand
    titleWhat determines if a pay can be deleted or reversed?

    What determines if a pay can be deleted or reversed?

    There's a security preference which controls whether your transactions can be deleted or reversed (Setup menu > Preferences > Security tab > Transactions CAN'T be Changed, They Must be Reversed).

    For pays that have been submitted to the ATO via STP, the status of the report submission also determines if you can delete the pay or if you'll need to reverse it instead.

    This table shows whether you can delete or reverse a pay based on its status in the STP Payroll Reporting Centre. For example, if the status is Sent you can only reverse the pay.

    Status
    Can delete?
    Can reverse?
    Rejected
    Not Sent
    Sent
    Accepted
    Accepted with errors
    HTML
    <div style="display: none;" data-swiftype-name="keywords" data-swiftype-type="enum">undo correct payroll</div> 
    </span>
    html-wrap
    width15%
    classcol span_1_of_5
     
    HTML Wrap
    floatleft
    classcol span_1_of_5
    Panelbox
    namegreen
    titleRelated topics
    HTML Wrap
    classsidebarlinks

    Processing your payrollEditing

    Enter employee payroll categories

    Jobs

     

     

     

    information

    Changing an employee's salary or hourly rate

    Changing an employee from full time, part time or casual

    About Single Touch Payroll reporting

    Fixing a payroll overpayment or underpayment

    Personalising pay slips

    Panelbox
    nameyellow
    titleFrom the community

    RSS Feed
    titleBarfalse
    max5
    showTitlesOnlytrue
    urlhttp://community.myob.com/myob/rss/search?q=edit+pay&filter=labels%2Clocation%2CsolvedThreads&location=category%3AAccountRight&search_type=thread&solved=true

    HTML Wrap
    classmorelinks
    More »